Water Savings Calculator Australia
Water is one of the biggest running costs of any Australian garden, and it is easy to spend more than you need to without realising it. This Water Savings Calculator gives you a quick, practical estimate of how much water and money you could save by watering more efficiently, switching thirsty lawn for drought-tolerant or native planting, or moving part of the yard to artificial turf. It is built for Australian conditions, using metric measurements and typical local water tariffs, so the numbers reflect real backyards in QLD, NSW, VIC, WA and SA rather than overseas assumptions. Enter your details below to see where your biggest savings are.
Water‑Savings Calculator
Estimate how much water & money you can save by switching from a natural lawn to All Seasons Synthetic Turf.
Your Annual Savings
0 kL of water
$0 saved on bills
*Calculations assume even watering and average municipal water rates. Adjust values for more accurate results.
About Lawn Turf / Grass Water Saving Calculator
The calculator compares the way you water now with a more efficient scenario. You enter the lawn or garden area, choose a state water tariff or your own price, and add rainfall if you want to. It then estimates your current water use and cost, applies a lower-water option such as synthetic turf or efficient watering, and shows the difference in kilolitres saved and dollars shaved off your bill, along with a rough pay-back time. The bigger the gap between how you water now and an efficient approach, the larger the saving.
Quick tip Check your latest water bill for your rate per kilolitre and any current restrictions in your area. Using your real tariff makes the dollar estimate far more accurate.
What you need before using it
- Your lawn or garden area in square metres — measure length by width, or add up separate zones.
- Your water price: pick a state tariff in the tool, or enter your own rate per kilolitre from your bill.
- Roughly how much rainfall your area gets, if you want to factor it in.
- The change you are weighing up, such as efficient watering, native planting or synthetic turf.
Practical Australian guidance
Australian water use swings hugely with season and location. A lawn through a Perth or Adelaide summer can need several times more water than the same lawn in a cool, wet month, and most states run restrictions that limit watering days and times. Drought-tolerant and native species such as grevilleas, lomandra and westringia are suited to local rainfall and usually need far less extra water once established. Artificial turf can reduce lawn-watering demand a great deal, but it may still need occasional rinsing or cooling depending on pets, dust, heat and use, so treat it as a large reduction rather than zero water. Use your local climate and restrictions as the baseline when you read the results.
Common mistakes to avoid
- Watering on a fixed schedule even after good rain, which wastes water and money.
- Giving lawns short, frequent sprinkles instead of deeper, less frequent soaks.
- Leaving your water tariff out of the sums, so the dollar saving looks smaller than it is.
- Forgetting that new plants and fresh turf need extra water until they establish.
Related calculators
Irrigation Runtime Planner
Work out how long to run sprinklers or drip without waste.
Frequently Asked Questions
It depends on how you water now and what you change. Households moving from daily lawn watering to efficient, weather-based watering or drought-tolerant planting often cut their outdoor water use noticeably. The calculator gives a personalised estimate based on your own area, water price and choices.
Yes. Once established, Australian natives are adapted to local rainfall and generally need much less extra water than exotic lawns and thirsty ornamentals, though they still need regular watering while they settle in during the first season.
It removes almost all lawn watering, which is a large saving in hot, dry areas. It may still need the occasional rinse to cool it or clear dust and pet mess, so treat it as a big reduction rather than truly zero water.
The tool compares your current watering with a more efficient scenario using your area, water rate and rainfall, then shows the difference in kilolitres and dollars. The figures are planning estimates, not exact bill amounts.
Yes. The calculator uses metric measurements and typical Australian water tariffs and climate patterns, so the estimates reflect local backyards rather than overseas assumptions.
Please note These results are planning estimates based on typical Australian water use, tariffs and conditions. Your actual savings will vary with climate, soil, plant type, water rates and how consistently you water, so treat the figures as a starting point and check your water bill and local restrictions.
